5 Common Mistakes with Custom Switches & Lubing Tech (And How to Avoid Them)
When I first dove into the world of custom mechanical keyboards, I was overwhelmed by the plethora of options available for switches and lubing techniques. The thrill of building my own keyboards quickly turned into a series of frustrating mistakes—each one a valuable lesson learned in my quest for the perfect typing experience. In this post, I’m sharing five common mistakes I’ve made (and seen others make) when it comes to custom switches and lubing tech, along with practical tips to avoid them.
Mistake 1: Skipping Switch Filming
One of my early mistakes was assuming that the stock switches would be good enough without any modifications. I quickly learned that one of the easiest ways to enhance the sound and feel of your switches is by applying films.
Switch films, typically made from a thin layer of Polycarbonate or PET, help reduce wobble and improve the overall feel. Here’s a quick breakdown of the film options:
| Film Material |
Price (USD) |
Wobble Reduction |
| Polycarbonate |
$5 - $10 |
Moderate |
| PET |
$6 - $12 |
High |
| Custom 3D-printed |
$15+ |
Variable |
When I finally decided to use films, the difference was night and day. The typing experience became much smoother, and I could hear the satisfying thock of each keypress without the annoying rattle.
💡 Alex Vance's Rule of Thumb: Always consider adding switch films to your custom switches. They might seem like a small addition, but the improvement in sound and feel is worth it!
Mistake 2: Using the Wrong Lube
When it comes to lubing your switches, I made the mistake of choosing a random lubricant without doing my research. Different switches and materials require different lubes. For example, I found that using Krytox 205g0 on linear switches like Gateron or Cherry MX made them silkier and more responsive. However, using the same lube on tactile switches can mute their feedback.
Here’s a quick comparison of popular lubes:
| Lube Type |
Viscosity |
Best For |
| Krytox 205g0 |
High |
Linear switches |
| TriboSys 3203 |
Medium |
Tactile switches |
| Super Lube |
Low |
Clicky switches |
Now, I keep a small stock of various lubes on my workbench so I can choose the right one for each switch type. The right lube not only enhances the smoothness but also maintains the longevity of the switches.
Mistake 3: Over-lubing
It’s easy to get carried away with lubing, especially when you believe more is better. During one of my early builds, I over-lubed my switches, resulting in a sticky mess that made typing feel sluggish.
To avoid this, I recommend using a small amount of lube (about a pea-sized amount) and applying it sparingly on the stem and spring. Moderation is key here. After applying, test a few switches before committing to the entire board to ensure you achieve the desired feel.
Mistake 4: Neglecting to Clean Your Switches
After a few months of heavy use, I noticed a decline in the performance of my custom switches. Dust, grime, and accumulated debris can significantly impact how well they function.
I’ve learned that taking the time to clean switches, especially if you’ve been using them for gaming or extensive typing sessions, is essential. I typically use a combination of compressed air and a soft brush to remove dust and debris.
For a deeper clean, I recommend disassembling the switches and using a mild soap solution to wash the components. Make sure everything is fully dry before reassembling.
Mistake 5: Ignoring the Switch Break-in Period
When I first started building my keyboards, I was impatient. I wanted the perfect typing experience right out of the box. However, I soon discovered that switches often need a break-in period to reach their optimal performance.
When I first installed my new switches, I was frustrated when they didn’t feel as smooth as I expected. After doing some research, I learned that switches can take anywhere from a few days to a couple of weeks of regular use to break in fully.
To expedite the process, I recommend performing a “switch workout” by repeatedly pressing each key to help them adjust more quickly.
How often should I lube my switches?
It depends on usage, but I typically recommend re-lubing every 6 months to a year, especially if you notice a decline in smoothness.
Is it necessary to lube every switch?
While it’s not strictly necessary, lubing can significantly enhance the feel and sound of your switches, making it well worth the effort.
Mistakes are an inevitable part of any craft, and the world of custom mechanical keyboards is no exception. By learning from my experiences, I hope you can avoid these common pitfalls and enjoy a smoother, more satisfying typing experience. Happy building!