A Realistic Routine for Custom Switches & Lubing Tech That Fits a Busy Life

As a mechanical keyboard enthusiast, I often find myself juggling a busy life while trying to keep my passion for custom switches and lubing tech alive. Between work, family, and personal projects, it can be challenging to carve out time for building and modding keyboards. However, I’ve developed a routine that allows me to stay engaged with this hobby without feeling overwhelmed. I want to share my approach, including practical tips and a structured routine that fits into everyday life.

Understanding the Importance of Custom Switches

Custom switches can improve your typing experience. Whether you're aiming for a smooth linear feel or a tactile bump, the right switch can make all the difference. For me, the journey began with researching different switch types—Cherry MX, Gateron, Kailh, and others—each with their own characteristics.

I initially dabbled with Cherry MX Browns, but soon transitioned to Gateron Ink Blacks. The smoothness and less scratchy feel really appealed to me. When I decided to start modding my switches, I realized that a structured routine would be essential to keep my progress steady.

My Routine for Custom Switches & Lubing Tech

Here's the breakdown of my routine that fits into my busy schedule, allowing me to enjoy building and modding without feeling rushed.

1. Prepare Your Workspace (20 minutes)

A clean workspace is vital for any project. I set aside a dedicated area in my studio, ensuring I have good lighting and access to all my tools. Here’s what I typically gather:

  • Tools: Switch puller, soldering iron, desoldering pump, tweezers, and a good quality lube (I prefer Krytox 205g0 for linear switches and TriboSys 3203 for tactiles).
  • Materials: Switches, a PCB, keycaps, and stabilizers.

2. Disassemble and Clean Switches (30 minutes)

Taking apart the switches can be a bit tedious, but it’s essential for a good lubing job. I typically sit down with my switch puller and carefully disassemble 10-15 switches at a time. I find that I can do this while watching a show or listening to music, which makes the task more enjoyable.

Once disassembled, I clean the parts with isopropyl alcohol and a small brush. This ensures that any factory lube or dust is removed before applying my preferred lubricant.

3. Lubing Switches (60 minutes)

Lubing is where the magic happens. Here’s a quick guide on how I approach this step:

  • Linear Switches: I apply a thin layer of Krytox 205g0 on the stem and spring. The viscosity ensures a smooth feel, and I typically use a small brush for precision.
  • Tactile Switches: For switches like the Gateron Browns, I prefer TriboSys 3203. I focus on the tactile bump, ensuring just the right amount of lube is applied to enhance the feel without losing the tactile feedback.

I usually lube 20 switches in one go. It takes about 30 seconds to a minute per switch, but the results are worth it. Remember, less is more when it comes to lube.

4. Reassemble the Switches (30 minutes)

Once the switches are lubed, I reassemble them. I find that using a small amount of pressure helps the switch parts fit together snugly. After they’re all reassembled, I like to test a few to ensure they feel just right before mounting them on the PCB.

5. Test and Fine-Tune (15 minutes)

Before I finalize the build, I plug in the PCB and test the keys. I use Switch Hitter, an excellent online tool, to check for any inconsistencies or issues. This part is critical; you want to ensure everything feels and sounds as you envision.

Structured Routine Overview

Task Time (minutes)
Prepare Workspace 20
Disassemble and Clean Switches 30
Lubing Switches 60
Reassemble Switches 30
Test and Fine-Tune 15

Total Time: 155 minutes (approximately 2.5 hours)

This routine may seem like a lot of time, but breaking it down into smaller tasks allows me to fit it into my busy life. I often spread this out over a week, dedicating an hour or two whenever I have a free moment.

💡 Alex Vance's Rule of Thumb: Always test a few switches after lubing before committing to the entire build. It saves time and ensures you're on the right track.

FAQs

How often should I lube my switches?
It depends on usage. I recommend lubing every 6-12 months or after heavy use to maintain optimal performance.
Can I mix different lubes?
Mixing lubes is generally not recommended, as it can alter the properties and feel. Stick to one type per build for consistency.
What if I make a mistake while lubing?
If you over-lube, you can gently wipe off excess with a microfiber cloth. If a switch feels scratchy, disassemble and re-lube as needed.
By following this routine, I’ve found a way to maintain my passion for custom switches and lubing tech while balancing a busy life. Each step is enjoyable, and every moment spent at my workbench is a step towards improving my craft. I hope this guide helps you find your rhythm in this rewarding hobby!