My Step-by-Step Blueprint for Custom Switches & Lubing Tech

As I sit at my workbench, carefully inspecting a fresh batch of mechanical switches, I can't help but reflect on the journey that led me to this moment. Custom switches and the art of lubing have become two of my greatest passions in the mechanical keyboard community. My process has been honed through trial and error, and today, I’m excited to share my step-by-step blueprint with you.

Why Custom Switches Matter

Creating a truly unique typing experience goes beyond just aesthetics; it’s about how your keyboard feels and sounds. Custom switches allow you to tailor the tactile feedback, actuation force, and sound profile to your liking. With the right techniques, you can transform a standard switch into a personalized masterpiece.

Step 1: Selecting Your Switches

Before I even think about lubing, I spend time considering which switches I want to customize. I typically gravitate toward Gateron, Cherry MX, or Kailh switches, each offering something special. Here’s a quick comparison of my favorite switches:

Switch Brand Tactile Feedback Actuation Force (g) Price (USD)
Cherry MX Brown Tactile 45 $0.60
Gateron Red Linear 45 $0.50
Kailh Box White Clicky 50 $0.65

After choosing the right switch, I consider how I want it to feel and sound. For me, a smooth, quiet typing experience is ideal, so I often lean towards linear switches like the Gateron Red.

Step 2: Disassembling the Switches

Once I’ve gathered my switches, it’s time to disassemble them. I use a switch opener, which I find to be an absolute game changer. This tool lets me pop open the switch housing without damaging it. I take my time here; rushing can lead to breakage, which is something I’ve learned the hard way.

Tip: Always keep a small container handy to organize the parts as you disassemble them. I often lose a spring or two if I’m not careful!

Step 3: Lubing the Switches

Here’s where the magic happens. Lubing is essential for creating a smooth typing experience, but choosing the right lubricant and application method can make all the difference.

I typically use Krytox 205g0, which is a thicker lubricant, perfect for linear switches. For tactile switches, I prefer TriboSys 3203, which offers a balance between smoothness and feedback.

Application Process:

  1. Spring Lubing: I apply a thin layer of lubricant on both ends of the spring. This minimizes spring crunch and enhances smoothness. I use a small paintbrush for this; it gives me better control over the amount applied.

  1. Stem Lubing: I apply lube to the stem’s sides and the bottom. A little goes a long way—too much can lead to a sluggish feel. I typically use a cotton swab to apply this.

  1. Housing Lubing: For the housing, I dab a bit of lubricant on the sides where the stem makes contact. Again, less is more here.

  1. Reassemble: After lubing, I carefully reassemble the switches, ensuring everything is aligned properly. I usually do a quick test on each one to make sure they feel right before moving onto the next.

Step 4: The Final Assembly

After lubing all my switches, I’m ready to put them into my board. I heat up my soldering iron to about 350°C, which is perfect for the solder I use. I’ve learned that too low a temperature can lead to cold joints, while too high may damage the PCB.

When I desoldered my first PCB, I was a bundle of nerves. I remember the satisfaction I felt when I successfully removed the old switches without damaging anything. With practice comes confidence, and now I feel at ease during this step.

Step 5: Testing & Fine-Tuning

Once the switches are in, I plug in my keyboard and run a switch tester. This is essential; I want to ensure every switch feels and sounds just right. If one feels off, I take it back apart, re-lube, and test again. It’s all about that perfect balance of feel and sound.

Personal Tip Callout

💡 Alex Vance's Rule of Thumb: Always test your switches before final assembly. A small adjustment now can save you a lot of hassle later!

FAQ Section

What type of lube should I use for my switches?
For linear switches, I recommend Krytox 205g0. For tactile switches, TriboSys 3203 is a great option.
How do I know if I've applied too much lube?
If the switches feel sluggish or sticky, you may have applied too much. Disassembling and cleaning them is the best way to fix this.
Can I reuse switches after lubing?
Absolutely! With proper care, you can reuse lubed switches. Just make sure to clean them if you're changing lubes or setups.

Wrapping It Up

Crafting custom switches is a labor of love, but the reward is worth every minute spent. Remember, it’s all about personal preference, so don’t hesitate to experiment until you find what works best for you. With every build, I become more confident and creative, and I hope you find your own joy in this amazing hobby. Happy building!